Trend 2/10 X 1/4 High Speed Steel One Flute Cutter

Trend 2/10 x 1/4 HSS Single Flute Cutter 2.0 x 5.0mm TRE21014HS

Trend HSS single flute straight cutter made from a single piece of High Speed Steel, ground with a very fine edge.

They are only suitable for nonabrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than the TC grades, but can be more suitable for certain applications.

These cutters are suitable for grooving, rebating, mortising and drilling, the single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute cutters.

The depth of cut on cutters of 2.0 mm diameter and below should be a maximum of 1.0mm per pass.

Single flute cutters must not be used in eccentric chucks.

Dimensions:
Shank: 1/4in
Cutting Diameter (D): 2.0mm
Cutting Length (C): 5.0mm

TRE21014HS